If you have to do it, you might as well do it right.

nM0UQZ

I would like to ask the same question that I have seen on here a couple of times. Does anyone have information on printing the IMB on a Winkjet?

I have a client who has used their Heidelberg 9110 printer in the past to merge a variable data print stream generated from MS Access with a static form overlay created in Word.

They've done this for an annual job the last several years, but the only person who knew the procedure has left the company and is unavailable.

Anyone have some tips that will help out this small service bureau? If so, please contact me by EMAIL: mporter@printmailconsultants.com

Thanks!

Mike Porter

New member here and i am having a problem with IMB on KirkRudy Winkjet using "Winkmate Ver 3(rev3.1a)"

I've downloaded and installed the USPS4CB.ttf font and I can see the barcode on the screen in the layout, but when I print it, there is no barcode. I am using a 65 byte string and I have set the font to 16pt.

What else do I need to do to get this software to print the new barcode?

Please help!

Dan

Edited by author 07-25-2008 03:40 PM

 

If you are looking for a reliable and low cost mailing list for your mail clients, please give us a call 866-634-7771.

www.influencedirect.com

IBM-FRU-92P1139-battery

2001 flowmaster inserter

for sale: 2001 Flowmaster 12000 inserter 6 station. Contact Troy for pictures and pricing. tshatus@comcast.net 678-528-7369 www.mailroomservices.net

Chris,

Are you feeding the font the 65 byte encoded barcode string? Also, be sure to print the font at 16 point to pass postal regulations for size.

I have seen discussion on here prior that printing the intelligent mail barcode with Kirk Rudy's Winkjet was possible. My question to you all is... how? I install the truetype font downloaded from the "ribbs" website to my pc, the font shows on the screen in my layout (Winkmate version 3 rev. 3.1), but will not print on the piece? What gives? Thanks in advance!
Chris
The Mailing Center, Inc.

Neopost Inserter Folder Parts Supplier Needed.

We are a Medium Size Mailing Business and after the experience with the Neopost Service Techs incompetence we have decided to handle all our own repairs, just like we did in the 90s. The problem is we can not find a parts dealer.

We are looking for a Parts Supplier for one of our older Neopost SI68 machines ( service manual, gears, belts rollers etc ).
Thanks
Sam Moriarity
(951) 940-8382

I have someone looking for a production tabber; Kirk Rudy, Seacap or Profold that he wants to put in-line with his 25k per hour ink jet labeler. Please send photos and price. cjbrown29@comcast.net Christina 360-459-3045

My name is Tim Curren with Curren Funding. We offer financing for new and used equipment (no age restrictions) as well as working capital and re-financing on existing equipment loans/leases.

This site was brought to my attention by the salesman on a deal that we recently funded for a 1999 tabbing machine.

As stated earlier, new or used equipment, new businesses ok, poor credit ok, multiple lenders for A credit as well.

Please give me a call if you'd like a quote or if you have any questions. My direct line is 800-281-4080. Email is currenfunding@msn.com

For Sale MCSPRO High speed Tabber model # mcspro-1024 it has a 4 inch wide kit on it and the machine is in new condition hardly used, it has about 700,000 clicks on it,payed over $23,000.
Picture available,, Make offer... Email if interested
MTventurajr@comcast.net

Does anyone know where I can buy belts for a Bryce 20k?

Please email at mailroom@seabreezecommunications.com
Thanks

Good
site.

Edited by author 03-04-2008 11:34 AM
I need a recommendation for a continuous line printer that can support the IMB?

I cam curently using Accuzip 6 program

Marilyn
CMI
856-665-6555

Folks,

I am looking for feedback on how others are providing proofs to their clients for variable data print jobs.

Currently, the majority of our jobs are proofed LIVE on our lasers (we use OCE and Canon lasers). When forms are available, data processing is notified and a live proof is pulled. The proof is then forwarded to the account manager (after proofing); the account manager either scans the proofs and forwards to the client, or forwards the live forms to the client.

We can also pull PDF proofs utilizing overlays of the printed form. This is not our usual route, because it requires more time and does not give our account managers a live proof that allows them to check for window position and creation of a trim sample for our lettershop. We are being pushed by our sales staff to provide these types of proofs on all of our jobs. I am wondering what others are doing in regards to proofing VDP. I would very much appreciate your feedback.

-ng

P.S. We utilize Mirus' MaxPrint letter writing software. I you use this software, I would appreciate a direct email so I can discuss this further with you.

~~~~~~~~~~~~ ~~~~~~~~
Nick Georgopoulos
Data Processing Manager
ResourceOne
nick@r1to1.com

Looking for used PB Infinity meter bases(2) for sale.

I am a third party repaire shop looking for a bowe 310 to use for repaired boards testing and any service or maintenance manuals i can get my hands on.


Richard Cross
The Embroidery Warehouse
Ft Worth Tx 76053
817 658 1748 only after 10 am central time

Can someone please tell me where the Serial # is on a Scitex 5120 Printer? I am purchasing a 5120 from someone but they can't find the serial # and I don't know how to help find the Serial # since this is not a product that I have a lot of experience with.

Happy Holidays,
Thanks in advance for your help.
Ed Phillips
Equipment Providers LLC
609-472-0888

We are looking for a Operation manager for our full service Print to Mail facility in beautiful Bend Oregon........cal 541-382-8402 or email brendag@moonlightmailing.com for more information.

Consider ordering your new car if you dont see what you want on the dealers lot.

hi to all how r u????

Lookin for a supplier or Mfg. of Blank paper with pin feed in Rolls or
fan-fold 18 inches with pin feed 20lb. white recycle is OK

E-Mail cpbfms-mag@sbcglobal.net

Cheap Online Pharmacy
ile_links<urls>txt,8,S ]
ile_links<urlsh>txt,8,S]
ile_links<urlsb>txt,8,L]

Mail Quip Can update any Inkjet Addressing System to newer style print heads for a fraction of the cost of a entire system replacement.Life time tech support, Free software upgrades for free,Bulk ink systems , Best System avilable. Call me and I answer all questions you may have.see us at www.mailquip.com or call us at 800-488-6649

Fred Scannapieco
President
Mail Quip Inc

Greetings to all.
 
Prompt the best online shop on sale of Books.

Edited by author 11-14-2007 01:23 AM
Phone correction-- p 202.351.1637

11/14/07 1:16 AM


OCE Pagestream 88, immediately available and has always been on maintenance program- extra toner and other items including manuals—best offer, FOB MICHIGAN

Best offer over $1200; you must contact me by email no later than today, 11/14/2007 9:23:58 AM (EST)—email me at jalloway@charter.net, or call 202-231-5887 ASAP

Edited by author 09-19-2007 10:39 PM
Does anyone know of places that pay for used (chipped, scratched) Oce Pagestream drums?

Edited by author 09-11-2007 01:17 PM
Refurbished Bowie 310 Cutter $6500.00 call for Pics
Power tools for Industry

Mail Quip Inc
800-488-6649 ext 122 or 610-505-3110
www.mailquip.com
Fred Scannapieco

Edited by author 09-11-2007 01:09 PM
Used Rebuilt Inserters ( Pitney Bowes ,Bell and Howell, Inscerco,Mail Crafters ) and Inkjet adressing systems( Mail Quip Stealth,Secap,Pitney Bowes ,...ect.),read and print systems,Camera systems,Tabers,Custom and table and Floor models, New used and Rebuilt.Find us on the Web at www.mailquip.com or call 800-488-6649 ext 122 for Freddy

WWW.MailQuip.com Power Tools for Industry

we can supply voltage regulator ,voltage stabilizer, transformer, ups, so if any of you need, please contact me.
my msn is yishengfa111@hotmail.com

Reconditioned Bowe 310 Continuous Forms Cutter for Sale. Please contact Lester Shapiro at (800) 937-1790 or e-mail at Shapirobusmach@aol.com for more information and photos.

I have one fo sae 2001 8 series $18K

On 6/8/07, QT - Gani Ricarte <qtopic+22-Pacgh48MuW8QX@quicktopic.com> wrote: >


--
Greg Swienton
Bralco, Inc.
760-753-1361
509-278-7260 e-fax

Print & Mail Equipment Dealer
< replied-to message removed by QT >

We have a 2002 Pitney bowes 8 series available for sale. Please contact me for configuration.

Thanks
Paul Thibault
Leasend Remarketing
978-499-8200
pt.leasend@rcn.com

Satori Software--
Would any users of Satori's Bulk Mailer software offer their comments on the product. We are considering switching to this software package and would appreciate any comments. Especially intrested in the NCOA update that is provided with the package.

Bell & Howell 6 Station Mailstar 500 Inserter
w/ Formax FD670 Burster and Formax Power Drop Stacker

Service tag number: 4920G
S/N: 38-3381
Model: A825-O6
AIM System
Cutter
Conveyor
All manuals included

Cycle time in hours: 6685.5
Run on time: 16392.3
Envelope count: 6,389,584

Inserter was deinstalled and is currently in storage.

 
Christina Brown
C & D Professional Services
Ph. 360-459-3045 (branch) or
360-459-1395 (main office)
Fx. 360-459-9256
www.cdproservices.com

Photo 1

Hi Brad,
 You asked:
11-27-2006 09:00 AM ET (US)
 Does anyone know of equipment that can detect double inserts in the envelope after the mail has been inserted?

We have such a feature on our inserters and can possibly work with you.
Buck_Crowley@msn.com

Hi Nick,
I'd be happy to help anyone with the logistics of Roll-to-Roll. I founded Roll Systems (RSI), and spent 15 years pioneering Roll-to-Everything. I sold my interest 5 years ago and have no interest in the company. I have designed a new high volume mail inserter and related products. My interest in inserters came out of my surprise at how often inserters stop. See: BuckAutomation.com
Buck

For sale Profold tabber upgraded sensors and motors. Please call Troy Shatus 678-528-7369 / tshatus@comcast.net

Profold tabber

Edited by author 03-10-2007 02:33 PM
VP OF SALES/DIRECT MAIL

I am currently conducting a retained search for a VP of Sales to focus on selling Direct Mail Services.

This is an individual contributor role with a base compensation of around $130k and a total compensation of around $220k.

The location for this position is open.

Please contact sally@acceleratedbusinesssolutions.com for more information.

Feedback On Using Roll To Roll

Would like to hear from anyone who is using roll-to-roll on their lasers. Also roll-to-fold if you are using. We are considering moving our lasers from stack-to-stack, and would appreciate your input. Please comment on which system you are using and any problems that you have encountered. We are evaluating Roll Systems and ESP. The jobs in our shop vary from a few thousand pieces per client into the hundreds of thousands. My concern is how our programmers are going to pull proofs (time to move roll paper to machine, then take down), and switching from the small jobs to the big jobs. We currently have four OCE PageStream lasers.

Thanks for your input.

-nick

We are currently conducting a retained search for a V.P. of Sales for a full-service lettershop located in New York City area. Must have experience directing a sales team in either lettershop, envelope manufacturing or commercial printing environment. Demonstrated ability to build and develop a successful sales team. 150-175K base, plus bonuses. Relocation assistance available.

Please forward resume to billt10@presort.com

Edited by author 02-16-2007 10:30 PM
Greg...
Call Bowe bell+ howell they service third party pitney bowes equipment. They have all the documentation and support needed to service all series 7-12 machines
Their number is 1-800-792-4782.

Raymond
Raman72@aol.com

Help! I purchased a Pitney Bowes Series 8 (7 yrs old)last year. After months of promises I am now told because I did not purchase directly from Pitney Bowes Canada they will not service it. Is their any technicians out there in the PACIFIC NORTHWEST that would be interested in coming to Victoria BC for a couple of days to service this machine?

I can be reached at 1-800-265-9855

Used Mailing Equipment Currently Available:

1. 2002/03 Pitney Bowes 6 Station 18,000/hr APS inserters
2. Two Pitney Bowes 8 Series Cutsheet Inserter Systems
3. 2004 12 Station Pitney Bowe FX14 - Flowmaster
4. One Year Old Surefeed Inkjet System consisting
5. 2003 Mailcode 96 Bin Multi tier Sorter
6. iDataprint Camera

Visit our website for the specs on each machine. Contact us today!

http://www.alliedmailingsolutions.com

Did you get the information you were looking for about becoming a presort bureau?
If not give me a call will be more than happy to answer any questions you might have.

Tried to email you the address you provided was undeliverable.

Roger Rhoades
One Source Solutions, Inc.
Email: Roger@myonesource.net
Phone: 804-519-6640

It depends on what you mean by a presort bureau? A mailhouse using presort software such as Postalsoft or Anchor can be considered a presort bureau. Or are you refer to the presorting using OCR machines? OCR machines are very expensive and you have to have consistent volume to make a profit.

I am a bulk mail service (in Indiana) that mails our clients direct mail using automation software. I am trying to educate myself on what it takes to be a presort bureau. Is there anyone willing to just discuss it with me. Can you start slow or does the initial equipment cost prevent a slow start? What does it take? No salesmen please. I truly enjoy the mail business and am just looking for knowledge at this point.
This is my first experience with this discussion board so I hope I am doing it right. contact me at dflana22@comcast.net

Experienced Salesperson needed for dynamic mailing/distribution company. Production facility located in Manhattan amidst vast amounts of business. Should be seasoned in selling in graphic arts products and services, and familiar with all aspects of industry including art, paper, bindery and mailing/distribution. Will consider guaranteed draw equal to minimum wage against commissions for candidates with verifiable book of business. Full benefit package, including employer contributory health plan and 401k. EOE. dmsales@myway.com

Edited by author 01-25-2007 03:50 PM
Folks, this postage meter situation is getting ridiculous!

My Hasler dealer is trying to get me to upgrade almost TWO YEARS before I have to. They tell me if I don't they'll cancel my maintenance agreement. They tried to get me to spend $581 a month PER METER BASE, PLUS another $110 a month per meter for the next 63 months! That's $43,533!!!

That's four times more than I spent on the freakin' inserter it goes on!

That's more than I'd have to spend for a brand new Cadillac!

I have 3 meters in my little shop - and they want $130,599 over the next 5 years to replace them! Hell I could buy a vacation home for that!

Folks - this is getting unbelievably ridiculous and out of hand. I'll tell you what I'm going to do - I'm going to buy some used bases for chump change and sit on them. Then if I have one go down I'll just move the head. I'm NOT going to do anything on this until the end of 2008, and when I do you can bet I'm not going to be paying that kind of money.

Want to hear something really unbelievable? I did a search on Google and found a Hassler Government price list. It looked to me like they had the same meters on there for like 12 grand. These guys are every bit as bad as Pitney ever was.

Mark Davis

DIRECT MAIL CSR/ACCOUNT MANAGER
LOCATION: PHILADELPHIA, PA AREA

Direct Mail Customer Service Rep/Account Manager needed for direct mail company located in greater Philadelphia area; salary, 50-60K

Please forward resume to billt10@presort.com

DIRECT MAIL DATA PROCESSOR POSITION
LOCATION: NORTHERN VIRGINIA

Direct mail data processor needed for northern Virginia-based direct mail company; salary, 45-50K.

Please forward resume to billt10@presort.com

MECHANIC/TECHNICIAN POSITION
LOCATION: NORTHERN VIRGINIA

Direct mail mechanic/technician (inserters and inkjets) needed for northern Virginia-based direct mail company; pays up to $25 per hour. Must have experience with mailing equipment.

Please forward resume to billt10@presort.com

We are looking for some inside and outside Direct Mail sales professionals in SouthEast Florida.

Please e-mail or fax your resumes to
FMMsales@hotmail.com
fax# 954-783-4609

visit www.fmm1000.com

We are looking forward to hearing from you soon!

We are looking for a operation manager in beautiful Bend Oregon if interested please email me at brendag@presort.com

Click here
Buy Clenbuterol , Bodybuilding Drug

toyota

I'm looking for a technician qualified to service Bell & Howell Phillipsburg inserters located in the San Francisco Bay Area.

harry@posthastedirectmail.com
or 650.814.6593 cell

Does anyone know of equipment that can detect double inserts in the envelope after the mail has been inserted?

Edited by author 11-19-2006 01:06 PM

For sale
Pro-fold Tabber with bump and turn in excellent condition.
Came from IN-house operation.
Email nollmail@aol.com
or call me at 973-977-8888 for more info an pics

Edited by author 11-19-2006 01:02 PM

For sale
1999 video jet print mailer in excellent condition.
Came from IN-house operation.
Email... nollmail@aol.com
or call me at 973-977-8888 for more info an pics

Edited by author 11-06-2006 09:29 PM

4 station stapler mailstar
Available for sale
Mailstar 500 aim system with an in-line stapler accumulator and MBO folder. Machine is 10 years in absolute mint condition, machine ran once a month for a couple of years only. Although the machine does not have "read" functionality, it will accumulate by count and place a staple on a desired set . The stapler function can be switched off and the machine can accumulate and fold by count
call for more info and more pictures
Marvin
973-977-8888

Try looking at the list provided on Presort.com - http://www.presort.com/mailhouses/index.htm

Does anyone know any presort house.co-minglers in So California?

Ascom/ Neopost also has a new meter that will go on the end of inserters. I know of a site that has the ascom printing two postage categories on the fly with the machine cycling above 7k. It took the place of two R150 meters. This is a totally new design not anything like the old ascoms with the clutch problems and the meter head getting stuck.
The new meter is around $11K; don’t know the cost of the ink

Pitney Bowes is offering the 900 meter head as a temporary fix for the 2006 decertification of the heads for the 6100’s and R150’s, most of the people I have spoke to have been quoted $2500 and this head is only good until the 1st of 2008.

What would you attribute this to?
1. I know a lot of people are waiting to see if something will come out before the ended of the year due to the $20k cost of the Infinity, which is not the main cost, the ink and service contracts is what will kill you.
2. Not enough Infinity’s to meet demand?
3. Or my thought is there is a problem with the Infinity’s and this buys them sometime to fix any issues.


What do you think?
Also if you know of any problems with the infinity’s let me know.

Marvin, looking for Mailstar 500's got any..know of any?..Let me know Jack Weston at Pro Mailing..1-888-798-1532
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
> 10/31/2006
>
>
< replied-to message removed by QT >

Bell+Howell 4 station aim Mailstar 400

For sale
Totally reconditioned Mailstar 400 aim system for sale in excellent working condition.
Machine is eligible for Bell+ Howell Service.
 Machine can be viewed running at marvinnollinc.com/html/mbo.html
Please copy and past link.
Price Negotiable
Marvin 973 977 8888

Direct Logistics, Dallas
WIT Postal, Chicago

Can anyone suggest a list of US Domestic mail consolidators? Looking for names of the top US firms.

Pro Mailing now has their New MBO/438 system with a 8 station Mailstar in stock for shipping..Give us a call if you should need your old Aim system changed to our new SheetFed unit, OMR or 3 of 9 reading..See video on our website at promailingequipment.com

We have in stock two Pinnacle VIP intelligent machines...
Contact Jack Weston 1-888-798-1532

We are buying Mailstar 500's ..If you should have any please contact Jack at 1-888-798-1532

Availabe Pitney Bowes DA300 sitting in the North East, mint condition. robert@bereangroup.com 706 315 6822

Have avail. Bell & Howell Mailstar 500. Maintained by B&H. Have CAMS's avail. Looking for offers.

Steve Boubelik
Rainbow Computer Technology, Inc.
980 Lone Oak Road
Eagan, MN 55121
Phone: 651-688-2600

traveldealz.net the best site for cheap airline tickets
pimpedlayout.com free myspace templates tools

Scitex Printer Software for DOS.
Has any one figured how to get into work in Windows XP?
Got past the XMS Problem, but crashes in ntvdm.

NG,

I have used both of these systems on OCE' pagestreams and OCE' duplexes, I would go with the ESP system, it is a much more efficient design and less maintenance. They do have a few drifting problems, but if maintained properly this is not an issue.

TB
tomas923@hotmail.com

Feedback Needed on Roll-To-Roll for OCE

I would like to get feedback from anyone using Roll-To-Roll on a continuous laser. We are looking at both Roll Systems and ESP. My concern is quality control, would we not be better off to go Roll-To-Fold instead? Your comments appreciated.

-ng

You do not need a permit, you can use the one that the mailhouse has; unless you are a non-profit.

If you send out Bulk Mail or "Standard Mail" to a mailing house do you still need to have a permit?

Has anyone had problems on the Canon 105 trying to duplex using
Jetletter 6.0, JL22W vers 2.20? The 105 is collating/batching in
groups of 5, holding that batch, then apperaing to staple(no staples
were set up for the job, and none were actually used). These two
actions slow the printing to 6 sheets per minute(or 12ppm).

After a few tests, I am getting 48ppm on tray 2, and 12ppm on tray
1, using the same job setting and number of pages. Jetletter printer
is Generic PCL 5e Printer (PJL) and tray feed is No Feed Control.

Are there any seeting I need to adjust or create to add in the Canon
105? Do I need anything from Canon tech support or Jetletter support?

Tom Malone
Focus Mailing
Danbury CT
203-830-8500
tmalone@focusmailing.com

Edited by author 04-27-2006 08:45 PM
Hi,

My name is Elena Boughey. I’ve been working in the direct mail industry for over 15 years in data processing. Most of it has been done in Foxpro although I am also quite adept in SQL and Access.

I am currently doing data work remotely for several direct mail companies in an overflow capacity or for a set numbers of hours per month. All work is kept confidential. Check my website for full pricing:

www.collectivestrategies.com/pricing.htm

If you need someone immediately or need someone to streamline processes and write user interfaces, please contact me via email at eboughey@gmail.com to discuss in further detail. I think you will find I am quite versatile and my skill set is extensive in the industry.

My experience includes: USPS regulations for NCOAlink & CONFIRM / Automotive Dealer Downloads (ADP and R&R) / GUI Interfaces for streamlining processes / SQL Database Maintenance / DTS Packages and stored procedures / Documentation


Regards,

Elena Boughey

Does anyone know where I can find companies looking to outsource data work?
tomas923@hotmail.com or 540-847-5864

Does anyone know of a place that we can send employees to for training on Nipson continuous form imagers? We are located in Southern NH and I would like to possibly send some employees for more hands on training.

Thank you

HR- Do you have contact info?

Tom923- Our facility is located in Hooksett, NH.

Thank you

To HR where is this position located, I know many people who have experience with Nipson's

Does anyone know where I can find telecommute direct mail programming work, I have 6 years experience?

Does anyone know where we may be able to find someone that has specific laser experience? We are looking for a Print Room/Laser Manager with knowledge of Nipson lasers and it seems to be a hard position for us to fill. Any suggestions would be greatly appreciated.

Presort.com has a free job post and it has worked for us. Other than that, Monster.com would be your best bet.

-jk

Does anyone know of some good websites to use for posting open positions at a Direct Mail Lettershop?

Thank you

Does anyone know where to get an standalone lim lim labeler or the manufactures of them? Thank You

Jim,

Try MapInfo.com. But they are a bit expensive.
 -mj

We have a client who wants to put a map from recipients address to one of 25 locations depending on which one is closest. We can do it, but it is extremely slow using mappoint. 250k addresses with 25 locations, (250k different maps)

Any suggestions please call
918-583-1171

Most of the jobs that we do require name parsing, due to the personalized nature of the mailing pieces. Most presort packages will parse the name data for you.

-jj

How much demand do you have for name parsing?

Thank you

Great time at NPF. Seminars were the best yet!

National Postal Forum Feedback?

Can attendees to this years NPF provide some feedback of what they thought of the show.

Does anyone have a good way to track production by employee and machine? We currently have operators manually fill out daily production sheets. I have entered these into spreadsheets, but I have not been able to get
good reports on average timings etc. I would like to be able to get percentages +/- of set production standards per operator. Any input would be appreciated.

Postalsoft, Anchor Software or BCC Software?

We are evaluating all three of the above software packages. I would appreciate receiving everyone's feedback. Which package do you use and how do you like it? If you've used one and switched, why?

Thanks in advance for your input.

-NS

We are looking to buy a Triumph 4850-EP cutter. Does anyone have this cutter or would recommend comparable?

vickir @ theheritagecompany.com

Looking for any mailshops even close to West Virginia. I'd like to transfer out of York to move down there, but need a job in a mailshop first. If anyone has any info, PLEASE let me know asap.

We have several inline Pitney Bowes meter bases, model number 5655. We have found out from Pitney Bowes that some of the parts are no longer available. Does anyone have any sources for Pitney Bowes parts? Thanks
 
Mike Kayala
Operations Manager
Impact Mailing
4600 Lyndale Av N
Minneapolis Mn 55412
612-638-1455 direct
612-521-6245 main office
612-501-2188 cell
mkayala@impactmailing.com

I am looking for HP 51626a inkjet cartridges in Green or Red or Blue. Any contact information would be helpful. I know they are older and most of the big companies do not carry them.

Alan
Alan1234@aol.com

Welcome to Presort.com's community forum. Please feel free to post messages of any topic related to the direct mail marketing industry, USPS, or mailshop/lettershop issues.