Hello I have a websight that I am starting and wanted to install a chat room so I downloaded the free trial to check it outso I downloaded it placed it in my sight and FTP'ed to my server only to find out that my hosting co. would not open the nessessary port,because it was a shared server so I then went with a dedicated server only to find out that I could not get it to work I have a windows OS-server 2003 Enterprize edition VD with plesk control panel does anyone know how to open or check a port it is there on my sight just not talking to the server Ive been trying this for days and can not seem to get it working any help on this issue would be greatly appreciated my sight can be veiwed at http://www.trubbles.com/tf_003.htm and the chat is at http://www.123flashchat.com/ thank you

I have installed a DVR (Digital Video Recorder) at a remote location away from my home.

I used the DMZ facility of a Belkin F5D7633uk4 modem/router at the remote location to set the IP address to reach the DVR.
 
At home I use my Internet browser to type in the real IP address at the remote location to see the DVR camera pictures. (static IP from my ISP). This works OK but now I cannot get to the router to carry out config/remote management etc.

I tried the normal OPEN PORTS facility on the router but could not get that to work..therefore I tried the DMZ as a last resort.

Any helpful comments would be much appreciated.
Thanks
Victor

hey i am having problem opening udp ports 500,4500,1701. for vpn server anyone kowning can answer on this chat

i found a problem about TCP/IP. TCP/IP not work properly.Please you give
me suggestion about TCP/IP.

 I am having problem with port, I received message that ,cannot connect to port 23

Hi,
I am having a controller with two ethernet interface where I can assign IP on different subnet.
For example
IP1:192.168.3.127
IP2:192.168.4.127

Now on the controller ,I want to run one application which will act as a server with Port No :30000 and at the same time I am planning to run one more application which will act as a Client with Port No:30000 ,but this client will connect to the server of 192.168.4.XXX .

Now my question is, whether this configuration is possible or not (Two different application with same TCP port ,can communicate with different range of host)? If yes how?

Thanks in Advance.
Amit

what does it cost to 'purchase' a port number for private use?

I have found a list of RDP parameters which can be written in a RDP file.
One of these parameter is "Transport Type". this parameter is used for passing protocol used for RDP connection.
But as I know RDP uses only TCP/IP.
So my doubt is why this parameter is specified. And what is the use of this parameter.

Please clarify my doubt and also provide some information regarding protocol used in RDP for data transfer.

Email ID: pranay.kumar@nechclst.in
 or pranaykumarcse@gmail.com

As you have probably noticed, I don't have much time to respond to all these questions. I hope that some of you will be able to help one another. Many of you are asking very detailed and specific questions that would be better solved by local technical support or experts. I'm sorry I no longer have time to address individual issues.

-- Richard Akerman
Webmaster, http://www.akerman.ca/

I would like to watch everthing that comes into the network card. Seeing how all the ports use the network card how can I watch it. Can I do this using winsock? e-mail daveandbelle@yahoo.com
Thanks

hi i wana tcp/ip poort for msn and yahoo messenger call vido coz this port not work 6891-6900
plz need site or smo thing 2 know tha ports
my mail is
riyad2008@hotmail.com

I have an astronomical observatory I run from the internet. I have several devices that I must control via the internet by assigning them ports and keeping the ports open to access the devices from the internet. I understand user ports are in the range of 49152 to 65535. How can I use ports in this range and keep my computer secure. I keep finding software loaded on my computer I didn't put there. Someone has obviously taken advantage of the open ports to put it there. Can I protect myself?

that's wskystalker@yahoo.com

Dear Sir's;
  Thank you for your Email ,i use popular Browsing port ,like
80.8080,and i wana know can our program contrlolling the
browsing by letting user only check E-mail like yahoo or MSN and
preventing this user from using program like chat program and
prevent the same user from using any type of download ,please
advice and give me an answe ASAP,with suitable protocol for this
issue and by the way can give me the way that i can prevent user
from using or entering site that containing live show or Radio
on line or anything like this. Regards

Dear Sir's;
  Thank you for your Email ,i use popular Browsing port ,like 80.8080,and i wana know can our program contrlolling the browsing by letting user only check E-mail like yahoo or MSN and preventing this user from using program like chat program and prevent the same user from using any type of download ,please advice and give me an answe ASAP,with suitable protocol for this issue and by the way can give me the way that i can prevent user from using or entering site that containing live show or Radio on line or anything like this. Regards,

QT - NEETI <qtopic+12-kEJgdn6FFtZ2b@quicktopic.com> wrote:



Mohammed Aljbory .
VSAT Engineer .
Mobile:+9647901362572 .
       
---------------------------------
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. < replied-to message removed by QT >