STUDENT OPPORTUNITIES

The Surface Hydrology Research Group of the University of Connecticut has an opening for one Ph.D. position in the Department of Civil and Environmental Engineering. The primary objective of the Ph.D. project is to improve current satellite-based evapotranspiration algorithms with the ultimate goal of obtaining more accurate evaporation estimates across the globe using MODIS datasets. For this purpose, the Ph.D. project involves field experiments (deploying scintillometer and other sensors), remote sensing data (MODIS, ASTER, LANDSAT) and strong quantitative analysis. We are looking for a highly motivated individual with a strong background in evapotranspiration algorithms and image processing. Send letter of application, vita, unofficial transcripts, and contact information for three references to Dr. Mekonnen Gebremichael, Department of Civil and Environmental Engineering, University of Connecticut, 261 Glenbrook Road Unit 2037, Storrs, CT 06269-20367, USA. For further questions, you may contact us at 860-486-2771 or mekonnen@engr.uconn.edu

Hi fourum, I have just started working with Arcmap, with an Ikonos image of my country, howver I am having a problem for the likes of I cannot seem to get my GPS way points projecting on the image. There is a tendancy that when i do the various projection that lattr pushes the previous away, they apprear at diffrent places in arcmap, can someone help me

I was looking for details on the availability of Evaporative Fraction products from MODIS and I have found in a ppt presentation the following information:

"Current project started in July 2004. Sample products for selected areas are anticipated by July 2005. Regional areas will be generated routinely by July 2006."

this power presentation (1530_ET_wood.ppt) is available at:

http://www.ntsg.umt.edu/MODISVeg.2004/

I wish the best success to this project, it would be extremelly usefull once available

Antonio

Edited by author 04-24-2005 04:30 AM
 I have been studyed the MOD16 algorithm for about 2 years. I have analysized and validated it in cropland (YES) in North China Plain, and I found some problems with the algorithm, especially about the parameterization of aerodynamic resistance and canopy resistance, which resulted in the estimated result far from the ground observations in the winter wheat field. Maybe, this is one of reasons why MOD16 product is now released. Now I am trying to modify it.
 If someone is interesting in it. I am looking forward to discussion with you. My email, sunzhigang.sun@gmail.com

Hi,
I also would like to know if the mod16 product is available and what is the acquisition procedure.
Thanks
Nino

I would also like to know when mod16 will be available?
Will the evapotranspiration product be available and what
  would the time resolution be of such a product?

Thank you

Hi
Does somebody know when MOD16 will be available (aprox) similarly to other MODIS products?
Thank you very much
Monica

--------------------------------------
Estación Experimental de Zonas Aridas-CSIC
Almeria 04001, Spain.
Tel. +34-950-281045
http://wwww.eeza.csic.es

Hi Arun.
Its not been available to my knowledge in the past.
Cheers,
Matt


QT - Arun Kannan wrote:

>
>

--

Matthew McCabe
Dept. Civil and Environmental Engineering
Princeton University
Princeton NJ, 08544
Ph: +1 609-258-1551 (Office) ** NOTE NEW NUMBER **
Fax: +1 609-258-2799 (Fax)

Web: http://www.princeton.edu/~mmccabe
< replied-to message removed by QT >

Dr. McCabe; Has the product been available to public in the past? If so, could you please tell me how I could get it.

The MODIS ET product is now being organised out of Princeton University. This will not be routinely available in the near future.
Best wishes,
Matt


QT - Arun Kannan wrote:

>
>

--

Matthew McCabe
Dept. Civil and Environmental Engineering
Princeton University
Princeton NJ, 08544
Ph: +1 609-258-1551 (Office) ** NOTE NEW NUMBER **
Fax: +1 609-258-2799 (Fax)

Web: http://www.princeton.edu/~mmccabe
< replied-to message removed by QT >

Hi forum, I am working for the department of geography, auburn university. I am trying to acquire MOD16 ET MODIS product. I could not find it listed on the EOS data gateway from where I get other products like NDVI, LST, SR etc. Is ET not available publicly yet? Can anybody please tell the forum about the product's status? Thanks.

Thank you very much for your help.

>From: QT - Marvin Baquero <qtopic+11-pMF68zQtwbAZ@quicktopic.com>
>Reply-To: QT topic 11-pMF68zQtwbAZ <qtopic+11-pMF68zQtwbAZ@quicktopic.com>
>To: QT topic subscribers <qtopic+subs@quicktopic.com>
>Subject: MOD16
>Date: 24 May 2004 12:22:11 -0000
>

_________________________________________________________________ Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail
< replied-to message removed by QT >

Hi Preeyaphorn,
My name is Marvin Baquero and I am a graduated student at the Central University of Venezuela, South-America. My mean interest is Hydrogeology but at the present I am studying Estimating evapotranspiration using remote sensing MODIS and SEBAL methodology by Dr. Richard G Allen (University of Idago). You can find it in this website http://www.idwr.state.id.us/gisdata/final_reports.htm
Well. I hope that this it can help you!
mbaquero75@yahoo.com

My name is Sang-Ki Moon. I want to know about scaling law between MODIS and IKONOS. between IKONOS and tower measurements about evapotranspiration. I approach the issue through NDVI of IKONOS and MODIS. I want to exchange information about this scaling issue and flux index making with you. Please send me email if you have comments and information and so on. My major is hydrogeology. I try to link hydrology and micrometeorology.
email : skmun@ysgeo.yonsei.ac.kr

When will this data be available for use?

Dear friends,
I am working at water research institute(WRI)in Iran.
I am studying about estimate ET from MODIS and ETM+ images in Uromiyeh basin by using SEBAL method.
If you have some information and knowledge to comment and exchange with me, please sent e-mail to me. Thank you.
manizhh_k@yahoo.com

My name is Preeyaphorn. I am a doctoral student at Department of Water Resource Engineering, Kasetsart University, Thailand. For my work, I will estimate evapotranspiration using SEBAL and MODIS to calculate water balance. If you has some information and knowledge to comment and exchange with me, please sent e-mail to me. Thank you.

TSEB (NORMAN and KUSTAS) and Granger method maybe of your interest... Yann

On Wed, 2003-09-03 at 20:20, QT - S.O-Duah wrote:
--
Doctorate Student
Labo. => http://www.star.ait.ac.th
Pers. => http://web.ait.ac.th/~st027364
< replied-to message removed by QT >

Dear friends,
I am a Ph.D. student at the University of Durham, UK. The goal of my research is to extract surface albedo, VI and LST from MODIS to serve as parametric inputs for regional evapotranspiration modelling over the Volta basin (Ghana, West Africa - semiarid environment).

It will be great to share ideas with colleagues who possess advanced knowledge in this area. I am aware that Bastiaanssen and some of his students have applied SEBAL to Kenya, Sri Lanka, Turkey, etc. Can this be suitable for savannah catchments of West Africa? If not, are there other suitable algorithms?
My email: sopoku62@aol.com

FYI: Another presentation document:
Test run of MOD16 logic for AVHRR in eastern Asia.
(Presented in IUGG2003, Sapporo, Japan, July 2003)
http://ryuiki.agbi.tsukuba.ac.jp/~nishida/...03_0704_IUGG_EF.pdf

Dear colleagues;

We published two papers regarding to the basic concept and implementation plan of MOD16:

Nishida, K., Nemani, R. R., Running, S. W., Glassy, J. M. (2003): An operational remote sensing algorithm of land surface evaporation. Journal of Geophysical Research, 108(D9), 4270, doi:10.1029/2002JD002062.

Nishida, K., Nemani, R. R., Running, S. W., Glassy, J. M. (2003): Development of an evapotranspiration index from Aqua/MODIS for monitoring surface moisture status. IEEE Transactions of Geoscience and Remote Sensing, 41(2), 493-501.

Please note that there were some mistakes in the papers:
http://ryuiki.agbi.tsukuba.ac.jp/~nishida/STUDY/errata.html

We are also getting ready to distribute the source code of MOD16 algorithm for MODIS data as well as NOAA/AVHRR.

Hello, My name is Marvin Baquero. I am Geologist Eng. At the present I am a master student in Geological Sciences at the Central University of Venezuela - South america. My research area is hydrology, specificaly in Estimating Evapotranspiration using remote sensig data - NOAA AVRRH and ground. I would like to know about MOD16 and talk with Ricardo Romero because I think we have the same project. Thanks a lot.
mbaquero@gea.ciens.ucv.ve

Hello Hassan,
My name is Yann Chemin, I am doctorate student in the Asian Institute of Technology (Thailand).
I have been working with SEBAL since 1997 on many countries in Asia. Many people on this list are more knowledgeable than I on this topic, so if i may suggest you send queries over this list they may help you too. My student email is st027364@ait.ac.th.

I am also having some few interests about the two-source Energy Balance model of Norman and Kustas... If you are interested in comparing the two models.

Greetings,
Yann

Edited by author 04-29-2003 03:09 PM
I'm student in field of REMOTE SENSING and GIS in course of MSc in Iran.My thesis subject is about estimation of evapotranspiration using MODIS and IRS images.I want to test SEBAL for it.I like to relate to everyone who can help to me and also I help to him/her if I can.
My email adress is:h5_khavari@yahoo.com

Edited by author 12-31-2002 01:03 AM
My name is Wang Kaicun, a PhD student from atmospheric science department of Peking University,China. My research area is similar to Wim Timmermans’s. But my interest area is the Tibet plateau where the data is scarce and the climate is arid or semi-arid. I have read the thesis of Wim Bastiaanssen, but I think his one layer model is not suitable to retrieve ET over arid and semi-arid area. Now, I want to get information from MODIS land products, and using two-source model to retrieve ET.
I hope communicate with Wim Timmermans. My email address: wangkaicun@163.com .

My Name Kimaro, T.A
I am a final year PhD student at Kyoto University Japan. My research area is distributed hydrological modelling for detection effects of land use changes to river flows. I am applying a two source SVAT model at a small basin in Japan to estimate Evapotranspiration and Evaporation depending on landuse(vegetation and soil types) while searching for information on remote sensing products applicable for my work i came across this forum and was interested to join. I hope to benefit from the experience of members and contribute by sharing my experience as it gather it on my research.

Maybe I first introduce myself to you; I am Wim Timmermans from the International Institute for Aerospace Survey and Earth Sciences (ITC) in The Netherlands. To keep it short, basically me, and some colleagues are working on (trying to) determine ET estimates from space for quite a while. We are using a one-source algorithm (SEBAL, by Wim Bastiaanssen) and apply this on several image types over different areas, basically in data scarce regions. At the moment I am trying to get the thing running for MODIS data as well (and validate that with eddy flux measurements in Northern Botswana, Maun).

Basically I am doing some work under the SAFARI2000 umbrella in an area over Botswana (Okavango delta), where I am trying to validate the thing as well. Apart from that SEBAL one-source model I am planning to incorporate a 2-source model also, possibly coupled to an atmospheric model as well, for which there is some support from the USDA Hydrolab.
When I examined the MOD16-presentation I wondered whether already some results are obtained with MODIS and its VI-Ts algorithm and whether thereare also validation sites outside the US (since in the presentation only mention is made of the AmeriFlux sites...)

I hope someone finds some time to answer my questions and of course I'm interested in any progress and other (parallel) developments as well...

I will like to know the dates of first MOD16 products. Exciting to see what the product can do over our Canadian regions. I ran a satellite ET algorithm in 1991 over southern Saskatchewan (N. Bussičres, R.J. Granger and G.S. Strong, 1997, Canadian Journal of Remote Sensing, 23, pp. 3-14). As part of CEOP, there is a project named "SAGE" which targets the Saskatchewan river basin. I remapped some MOD10 and MOD11 from ISIN onto our Saskachewan grid. I hope to compare MOD16 to data from our boreal study site and from our models, etc.
N.B., Climate Research Branch, Environment Canada, Toronto

I am working on water balance applications in SE of Southamerica, and we are using transp estimates based on NOAA/AVHRR.
I wonder where can we get MOD16 transpiration estimates for this region
Thanks in advance

this is a test. :-)

I had a bried discussion with Joe Glassy today.

- Now he starts implementation of the EF logic for operational production (ECS).

- We need to set up validation plan for EF products and compile it to a document soon.

History and schedule of seminar

Poster presentation in AGU Spring Meeting, 2001
Poster presentation in AGU Fall Meeting, 2001
Seminar in NTSG: Jan 29, 2002
Seminar in USDA/ARS: Jan 31, 2002
Seminar in Boston Univ.: Feb. 8, 2002
Seminar in NASA/Ames: Feb. 13, 2002
Seminar in NASA/Goddard: Feb. 22, 2002

by Kenlo Nishida

Report of AGU in San Francisco 2001: I presented a poster about current situation of MOD16. You can see the poster here. About 20 people came to listen to the presentation. Their responses were fairly favorable, although some people (e.g., B. Law) pointed out the VPD and soil moisture are still problematic. In order to explicitly incorporate VPD in the algorithm, we may have to consider about using MODIS atmospheric product (MODIS Precipitable Water product (MOD05_L2); MODIS Atmospheric Profiles product (MOD07_L2) ) as well as atmospheric profile product of AIRS/AMSU/HSB on board Aqua satellite.

This is a working place of MODIS16 Evapotranspiration
Programm. Do not link this place from anywhere because
we want to keep this place as well as some materials
linked from here confidencial until our products become
open to public. Kenlo Nishida, 12-16-2001